Click the link below to view the options

We are pleased to introduce two new sizes into our ProForm®700 stock range and will be landing

This week, a large streamline, 73mm x 37mm, was created as an aerial mast on a Hawker Sea

Proform®700 is the latest addition to our high-performance, cold-drawn seamless tube range.The

We have increased the size range of our BS4 T45 material. Please click the link below to view our

We are pleased to announce that we have successfully passed our audit and have been issued a new

Now in stock. Strenx700 is a hot rolled steel sheet that offers a yield strength of 700 mpa minimum

We often generate offcuts and shorter lengths of stock at our warehouse in Daventry. A list of what

Some profiling work was completed today for a ’70s single-seater that required new flat-sided

FIA APPENDIX J ARTICLE 253/A16.2 and MSUK K2.2.2/DRAWING K64 We are often asked for the 35mm x 35mm

We’ve expanded our stock range of ROPT510. The range will now have 0.750″ x 16swg

We’ve teamed up with SB Motorsport and supplied ROPT510 for the Roll cage and chassis

At ProFormance Metals, we often get asked “which type of tube is best for my roll cage?”

We have access to a wide range of High-performance materials that can be cut to size and shipped

We’ve updated our tooling to produce a wider range of stainless steel flat sided oval tube

We now have in stock 15CDV6 plate 15CDV6 Annealed AIR9160C and ASNA 3102 Plate Yield Strength :

Restoring a Ferrari? We have a wide range of oval tubes used in the chassis construction on the

Fresh stocks of 4130 Chromoly annealed sheets are now available to order. 6ft x 3ft 0.032”

Below are the regulations set by Motorsport UK for material choice and sizes of tubes eligible for

Updated : 24/03/2020 – We are still able to operate as normal, although some delivery times

We stock and supply Curved gussets that conform to FIA Appendix J, Article 8.2.14 Dimensions Radius

Available from our Ebay store in 3 striking colours @ £85.00 including VAT and free postage The

We have taken the decision not to exhibit at the Autosport International show for 2020. Our team

We now have a range of 15CDV6 1.7734 flat sided oval available in stock. Click here to see the size

We have updated our 4130 tube size list. This shows standard sizes produced and easily supplied.

The advantages of a bespoke fitting roll cage compared to an off the shelf kit: The Roll Cage is

We have increased our stocked sizes of 15CDV6 in all forms. Round Tube Solid Bar Sheet Plate Square

We will be exhibiting at Race Retro 2019. Come and find us on Stand 1-211 where we will be

Stop by and check out our new products and see the car in the

A Roll cage is a specially engineered and constructed frame built in or around the passenger

Our Ropt510 is now available in 1.625”od x 10swg / 41.27mm x 3.2mm.  Compliant for CDS rollcages

  30th June 2018 will see the return of our two gravity karts in the Welton Soapbox Derby The

Our 40mm x 2mm metric  ROPT510® roll cage tube is now in stock ready for worldwide

We have expanded the tooling range to produce more oval and flat sided oval dimensions. All from

ROPT510 exceeds the minimum regulations set by the MSA and FIA for use in Roll cages, Roll hoops

  We will be exhibiting at Race Retro 2018. Come and find us on Stand 1-226 where we will be

ProFormance Metals will be exhibiting at the Autosport International Show 2018 on the 11th -14th

Stand 6262 We will be exhibiting at the Autosport International Show 2018 on the 11th -14th January